Pulsed laser cleaning machine is equipped with pulse laser source and galvo clean head. If you have high-value products need to clean and without harm the base materials, that must be use pulsed laser cleaning system. Laser cleaners are designed for laser degreasing, laser paint removal, laser zinc removal, laser film removal, laser coating. Laser cleaning machines are used for rust removal from metal surface, paint removal treatment, plating, coating removal, oil, stain, dirt cleaning, and rubber mold residue cleaning. Compared with the traditional cleaning methods such as mechanical friction cleaning, chemical corrosion cleaning, liquid solid strong impact cleaning and high frequency ultrasonic cleaning, manual laser cleaner has obvious advantages.

For the purpose of removing contaminants from various surfaces, we use fibre laser cleaning equipment. This equipment uses a laser beam to erode contaminants while leaving the surface intact. It is a safe, effective, and efficient way to clean fragile surfaces without causing any damage. It is also suitable for cleaning hard-to-reach areas. The following are examples, but not limited to: Dealing with these problems usually comes at a significant cost, but laser cleaning is changing this: it is a cost-effective solution that reduces cleaning times and maintenance.Laser cleaning is an eco-friendly process used to remove rust, paint, oxide and other contaminants from metal surfaces. Because of its efficiency, it is being used in an increasing number of applications. Laser cleaning requires a pulsed fiber laser (typically 50 watts or more). For a given surface area, putting the same energy within a short pulse increases the power. It’s like using the bigger hammer. A pulsed laser beam is more efficient and provides a faster removal speed than a continuous beam. And while short laser pulses clean surfaces faster, they also ensure that the underlying material does not heat up too much. 4. It is Consumable-Free and Environmentally Friendly The laser + inert gas method, that is, while the laser is irradiated, an inert gas is blown to the surface of the substrate. When the dirt is peeled from the surface, the gas will be blown off the surface immediately to avoid re-contamination and oxidation of the surface.

With over 10 years of experience, STYLECNC's laser cleaners are more professional than other manufacturers and dealers.

See Our Handheld Lasers in Action

The Raycus 50W is capable of removing both organic and inorganic contaminants including rust, carbon deposit, scale or salt deposits, old grease, primers, corrosion preventive coatings as well as paints. It is widely used in industries that work with metallic surfaces, such as the car manufacturing industry, ship and marine engineering industry, precision machinery industry, military equipment industry, nuclear power plant industry and the mold industry among others. Laser + liquid film method, that is, first deposit a layer of liquid film on the surface of the substrate, and then use laser radiation to decontaminate. The portable fiber laser cleaner can remove pollutants and contaminants from many types of materials without damaging. It is a "green" cleaning method. It does not need any chemical reagent and cleaning liquid. The waste cleaned is basically solid powder. It is small, easy to store and recycle, and can easily solve the environmental pollution caused by chemical cleaning.

Removing rust with a laser is a far better alternative to many conventional cleaning techniques. Laser rust removal is non-abrasive to the surface, environmentally friendly, cost-effective and highly flexible if a portable system is used, such as the JETLASER series of flexible, handheld laser cleaning machines. Laser Paint Removal Cost-saving - With no additional chemicals or blast media required, ASP's Laser process helps to save on costs associated with traditional cleaning methods.Mold cleaning has always been a place to show the advantages of laser cleaning technology, such as the rubber processing industry, the foundry industry, the injection molding industry, and the food processing industry. Laser cleaning technology can remove residual contaminants such as release agent and production residue attached to the surface without damaging the mold, restore the mold performance, avoid chemical damage to the mold, and extend the mold cleaning cycle and use. life. Laser ablation occurs when a material layer or a coating is removed with a laser beam. This is the process behind all laser cleaning applications. Take laser rust removal on steel. When the beam hits the surface, molecular bonds in the dust or rust layer are broken and ejected from the substrate. In less technical terms, you can imagine that the layer to be removed is simply vaporized by the laser beam. A clean surface for painting and welding is ensured with laser cleaning for surface preparation, which removes corrosion, rust, paint, etc. Laser cleaning is a fast and easy way to achieve the desired surface finish. This process is environmentally friendly and cost-effective, making it an ideal choice for many industries. It also helps to reduce the risk of contamination during production. A simple way to grasp the importance of the ablation threshold is to compare it to throwing a ball over a wall. If you don't throw it high enough, it will never make it over to the other side. Even if you throw the ball a thousand times, you will always fail. The same applies to laser derusting. You can shoot the laser beam a thousand times but as long as the energy is below the ablation threshold of the material you’re working with, nothing will ever be removed. Utilizing advanced photonics, mechanics, electronics, robotics, imaging, spectroscopy, and AI technologies in its design, each system is highly effective in surface treatment and cleaning without using any chemicals or blast media.